Loading... Please wait...

Recoil Spring for 3rd Gen 19, 23, 32 & 38 Glock Pistols

  • Image 1
0.10 LBS

Product Description

Recoil Spring for 3rd Generation Glock pistols
  Glock Models 19, 23, 32 & 38

 Click Here To Purchase at CPWSA.com

 Click Here To Purchase at GlockParts.com

Heavy Composite Plating To Maximize Salt Water Corrosion Resistance
Made From an Enhanced Tensile Music Wire
Optimized Spring Geometry - More Active Coils For Improved Reliability
Extensive Post Wind Processing


White Sound Defense recoil springs for 3rd generation Glock pistols allow the use of aftermarket weighted guide rods without sacrificing the corrosion resistance needed for reliability in military and field environments. These springs are heavily plated with a protective composite that provides a high level of protection, even in the presence of salt water. It is this composite that gives the springs their spotted green and silver surface. When combined with reasonable firearm maintenance these springs will endure the most hostile of environmental conditions.

As these springs are intended for military / tactical applications they are OEM equivalent rate (poundage) for use with standard commercial or military loads.

WSD recoil springs for Glock pistols are made from an enhanced tensile strength music wire designed and produced specifically for this spring. This steel exhibits extreme toughness and durability while providing an excellent substrate for the protective plating. It is the most durable and longest lasting material available for this application. Stainless is not used in the Glock recoil spring application because of the extreme tensile strength requirement imposed by the geometry of the firearm.

Unlike other recoil springs for Glock pistols these springs have open rather than closed ends. This means all the coils are active which improves the function and longevity of the spring. However, the open ends are not effectively retained by most captured guide rods, so the use of uncaptured rods is recommended.
(See Video Links Below For Details)


No special maintenance is needed for these springs outside the normal cleaning and lubricating of the firearm.


Q: Why does the guide rod (and sometimes the underside of the barrel) turn silver/grey when using White Sound Defense springs?

A: The rust preventative coating on the springs can rub onto surrounding surfaces giving them a grey/silver color. It is usually most noticeable on the guide rod. This is a bit like grease spreading from one surface to another and is not harmful.


Find Similar Products by Category

Add to Wish List

Click the button below to add the Recoil Spring for 3rd Gen 19, 23, 32 & 38 Glock Pistols to your wish list.

You Recently Viewed...